OUTLINE /CDEP105
DIMENSIONS (mm)
/ インダクタンス公差
/ インダクタンス測定周波数(L)
/ 品名表記法
100kHz 100kHz
0.36μH ± 30% (N), 0.8μH – 8.8μH ± 20% (M)
0.22μH ± 30% (N), 0.45μH – 5.0μH ± 20% (M)
Measuring Freq. (L)Tolerance of Inductance CDEP105(L)
CDEP105(H)
CDEP105(L)CDEP105(S)Ordering Code CDEP105 - -
: Parts No.
: Tolerance of inductance M (20%) N (30%)
: Packing
C (Carrier tape) B (Box)
:
88 (Low D.C.R. type) 50 (Standard type)/ 無鉛製品について
About Lead-free products .Lead-free products are now available for sale
.To order a lead-free product, please add"NP" after the product type:無鉛製品は現在、販売されております。
ご注文の際は製品タイプ名の後に”NP”をつけてください。
e.g. △△△○×
Ordering code of lead-free product: Type name NP △△△○×
..Ordering code of lead product: Type name-/ その他
Other *E Saturation Rated Current : The current either the inductance value becomes 35% (tolerance ±
30%) lower than its nominal value or becomes 25% (tolerance ± 20%) lower than its nominal °C)*E
直流重畳許容電流:直流重畳許容電流を流した時、インダクタンスが公称インダクタンスの65%以上(インダクタンスの交差が±30%時)、又は75%以上(インダクタンスの交差が±20%時)*IV Temperature Rise Current (Typ.) : The actual current when temperature of coil becomes
?T=40°C. (Ta=20*IV
温度上昇実力電流:直流電流を流した時、コイルの温度上昇がΔT=40℃となる電流の実力値°C)value.(Ta=20 となるとなる(Ta=20℃)
とする。(Ta=20℃)
( 0.15μH - 8.8μH )
2
1
3BOTTOM VIEW / 裏面図
100kHz CDEP105(S)0.15μH – 0.3μH ± 30% (N), 0.5μH – 3.0μH ± 20% (M)
CDEP105(H)
外形寸法図
磁気構造図
https://www.docsj.com/doc/1110666531.html,
Rev1.0 09/2004
North America
Tel:(1) 847 545-6700Fax:(1) 847 545-6720
E-mail: sales@https://www.docsj.com/doc/1110666531.html, Japan
Tel:(81) 03 3667-3302Fax:(81) 03 3667-3408
Hong Kong
Tel:(852) 2880-6688Fax:(852) 2565-9600
E-mail: sales@https://www.docsj.com/doc/1110666531.html, Taiwan
Tel:(886) 2 2726-2177Fax:(886) 2 2728-2726
E-mail: sales@https://www.docsj.com/doc/1110666531.html, Singapore
Tel:(65) 6296-3388Fax:(65) 6296-3390
E-mail: sales@https://www.docsj.com/doc/1110666531.html, Europe
Tel:(32) 2673-9565Fax:(32) 2672-0454
E-mail: sales@https://www.docsj.com/doc/1110666531.html,
CONSTRUCTION
概要
By using the square wire, power inductors can be used for large currents with low profile and low resistance.平角線を使用する事により、薄形?低抵抗で大電流対応を実現しました。
LAND PATTERNS (mm)
推奨ランド寸法 CONNECTION 端子接続
32 (High power type)