离心式中浓纸浆泵是通过高强度剪切使中浓纸浆发生湍流,纸浆具有近似于牛顿流体的特性,从而实现离心输送。湍流发生器是离心式中浓纸浆泵的关键
部件,在叶片边缘处对纸浆纤维施加高强剪切力破坏并分散纤维网格,使纸浆处于强烈的湍动状态,具有了流动性,从而实现中浓纸浆流体化[1],其结构设计的好坏,直接影响到整台泵的性能。本文运用中浓纸浆的湍流化理论设计了3种不同直径的湍流发生器,并在中浓浆泵上进行中浓纸浆的输送能力测试,以检验湍流发生器结构的合理性。
1 湍流发生器计算和设计
1.1
结构选择所有中浓泵的湍流发生器都采用剪切叶片旋转剪切浆料实现
□基金项目:
浙江省科技计划优先主题重点工业项目“高效高扬程离心式中浓纸浆泵研制”(2010C11026)。摘
要:湍流发生器是离心式中浓纸浆泵的关键部件,其作
用是使纸浆实现流体化并进行气液分离。本文提出了螺旋叶片式湍流发生器的湍流临界转速的计算公式,设计了不同直径的湍流发生器并利用中浓泵测试系统进行了测试。测试结果证明,实验数据分析与公式计算结果相符。为优化湍流发生器的结构设计奠定了基础。关键词:中浓浆泵;湍流发生器;临界转速;螺旋升角;性能曲线
Abstract: Turbulence generator is a key component of medium consistency pump, its function is to realize pulp fluidization and gas-liquid separation. In this study, a formula for turbulent critical speed of helical blade turbulent generator was presented. The turbulence generators with different diameters were designed and tested by a medium consistency pump test system. The test results show that the experimental data analysis conform to the formula. It lays a foundation for optimizing the structure design of turbulence generator.
Key words: medium consistency pump; turbulence generator; critical speed; helix angle; performance curve
中浓浆泵螺旋叶片式湍流发生器的设计及其性能测试
⊙ 李瑞瑞 徐国华 樊磊嘉 朱晓燕 胡华菁
(轻工业杭州机电设计研究院,制浆造纸国家工程实验室,杭州 310004)
The design and performance test of helical blade turbulence generator for medium consistency pumps
⊙ LI Rui-rui, XU Guo-hua, FAN Lei-jia, ZHU Xiao-yan, HU Hua-qing
(Hangzhou Project & Research Institute of Electro-mechanic in Light Industry, National Engineering Laboratory of Pulping and Papermaking, Hangzhou 311004, China)
图1 螺旋叶片式湍流发生器转子结
构示意图
中图分类号:TS737+.2
文献标志码:A 文章编号:1007-921
1(2017)24-0060-04
技术进步Technology
60
第38卷第24期 2017年12月